OPENRIG FX · EQ

OR EQ

Five bands and two cuts, drawn as a curve

OPENRIG FX · EQOR EQ
A drawing of the plugin.

What it does

OR EQ is a parametric equaliser: a low cut and a high cut, a low and a high shelf, and three bells with their own width.

It adds no latency and stays smooth while you turn a knob or automate it. A flat EQ leaves the signal untouched, bit for bit.

The curve a host draws is the curve you hear: tests compare the plugin's measured response with the drawn curve, within 0.02 dB.

In OpenRig

A large EQ curve with the bands as handles; the knob row shows the selected band.

When to use it

  • Cut the low end and the fizz after a high-gain amp.
  • Push the mids so a lead cuts through the mix.
  • Scoop the mids, or match two rigs before a show.

Controls

OR EQ · Mono
ControlRangeDefaultWhat it does
Low cut onOff, OnOffTurns the low cut on.
Low cut20 Hz to 400 Hz80 HzHigh pass, 12 dB per octave.
Low freq40 Hz to 600 Hz120 HzCorner of the low shelf.
Low−15 dB to +15 dB0 dBLow shelf.
Low mid freq100 Hz to 1.5 kHz400 HzCentre of the low-mid bell.
Low mid−15 dB to +15 dB0 dBLow-mid bell.
Low mid Q0.3 to 81Width of the low-mid bell: higher is narrower.
Mid freq300 Hz to 4 kHz900 HzCentre of the mid bell.
Mid−15 dB to +15 dB0 dBMid bell.
Mid Q0.3 to 81Width of the mid bell: higher is narrower.
High mid freq1 kHz to 10 kHz2.5 kHzCentre of the high-mid bell.
High mid−15 dB to +15 dB0 dBHigh-mid bell.
High mid Q0.3 to 81Width of the high-mid bell: higher is narrower.
High freq1 kHz to 12 kHz4.5 kHzCorner of the high shelf.
High−15 dB to +15 dB0 dBHigh shelf.
High cut onOff, OnOffTurns the high cut on.
High cut1.5 kHz to 20 kHz8 kHzLow pass, 12 dB per octave.
Level−15 dB to +15 dB0 dBOutput level, to match the bypassed level after boosts or cuts.

Presets

Values that differ from the defaults
De-Fizz
High mid freq 4.5 kHz, High mid −5 dB, High mid Q 2, High cut on On, High cut 7 kHz
Mid Push
Mid freq 800 Hz, Mid +5 dB, Mid Q 0.8, Level −2 dB
Scooped
Low +3 dB, Mid freq 700 Hz, Mid −6 dB, Mid Q 0.7, High +3 dB
Tighten
Low cut on On, Low cut 90 Hz, High cut on On, High cut 9 kHz