OPENRIG FX · SIGNATURE · GLITCH

SPLINTER

Stutter, tape stop and chop on the beat

OR Splinter

OPENRIG FXSPLINTERSTUTTER, TAPE STOP AND CHOP ON THE BEATREPEATSPITCH STEPDECAYSTOP TIME
A drawing of the plugin.

What it does

OR Splinter is a glitch effect for live playing. One footswitch, HOLD, does one thing on the beat while you hold it.

Repeat captures a slice of 1/4 to 1/32, triplets included, and plays it again and again. Reverse plays it backward. Tape Stop slows the sound down to a stop, then spins it back up when you let go.

Each repeat can lose some level and step the pitch up or down, for falling stutters and rising rolls. Repeats sets how many play; at 0 they last as long as you hold.

Chop gates the sound with a one-bar pattern, and Crush lowers the bits and the sample rate. Both work while HOLD is held, or all the time.

Splinter follows the host's tempo and bar, or its own Tempo when the host sends none. It has no latency.

In OpenRig

A faceplate of its own: a worn gunmetal plate with skirted knobs, and HOLD ready for a momentary footswitch. A step grid view of the bar, the slice and its repeats is planned.

When to use it

  • A stutter on the last beat before a breakdown.
  • A tape stop to end a song or a section.
  • A gallop or breakdown chop on chugged riffs.
  • Falling or rising rolls on a held chord.

Voicing notes

This is the signature glitch pedal: one footswitch that does one thing on the beat. Long step sequencers and per-step editing are left out; they belong in a DAW, not under a foot.

The OpenRig touches start with the press that forgives a late foot. When the host gives a bar, a press waits for the next line of the slice grid. A press up to 40 ms late starts on the line just passed, and the capture still begins on the beat.

Breakdown is a chop pattern of 3-3-2 groups of sixteenths, the chug of a metal breakdown. Gallop, offbeats, eighths, sixteenths and triplets are there too, with a duty per step.

Chaos adds random reverses, octave jumps, faster rolls and drop-outs to the repeats, and flips chop steps. The same press gives the same result, so a take can be played again.

No click: every seam is a short crossfade, a roll stays on the grid however long you hold, and a tape stop fades out as it slows. At rest the output is the input, bit for bit.

No trails on purpose: a stutter that kept playing after you let go would be a fault on a stage. On bypass the output crossfades back to the input in 10 ms.

The face is a brushed gunmetal plate, heavily worn, with steel skirted knobs.

Controls

OR Splinter · Mono
ControlRangeDefaultWhat it does
Slice1/4, 1/4T, 1/8, 1/8T, 1/16, 1/16T, 1/32, 1/32T1/8Length of the slice captured, and the grid HOLD starts on.
Repeats0 to 160Repeats played after the slice, then back to the input; 0 repeats as long as HOLD is held.
Pitch Step−12 st to +12 st0 stPitch change of each repeat after the first (the slice is played faster or slower).
Decay0 dB to 12 dB0 dBLevel lost by each repeat after the first.
Stop Time0.25 beats to 4 beats1 beatTime the tape takes to stop, in beats at the tempo.
Duty10 % to 100 %50 %Share of each step the chop lets through.
Bits1 to 1616Resolution of the crush; 16 is off.
Rate500 Hz to 48 kHz48 kHzSample rate of the crush; the top of the range is off.
Chaos0 % to 100 %0 %Random changes to the repeats (reversed, an octave up or down, rolls, drop-outs) and to the chop steps.
Mix0 % to 100 %100 %Dry and effect signals.
ActionRepeat, Reverse, Tape Stop, NoneRepeatWhat HOLD does: repeat the slice, repeat it backward, stop the tape, or nothing but the chop and the crush.
ChopOff, 1/8, 1/16, Triplets, Gallop, Offbeat, BreakdownOffRhythmic gate over one bar: straight notes, a gallop, offbeats or a breakdown pattern.
Chop and CrushWhile Held, AlwaysWhile HeldWhen the chop and the crush apply: while HOLD is held, or always.
Tape StartOff, OnOnOn release, the tape spins back up in half the Stop Time instead of cutting back to the input.
QuantizeOff, OnOnStart HOLD on the slice grid (from the host bar, or from a running chop). Off, or with no grid, the press starts at once and is beat one.
HoldOff, OnOffWhile on, the action plays: assign it to a momentary footswitch (or a latching one). The capture starts on the slice grid when Quantize is on.
Tempo40 BPM to 300 BPM120 BPMTempo when the host sends none.

Presets

Values that differ from the defaults
Breakcore Chaos
Slice 1/16, Duty 75 %, Bits 8, Rate 12 kHz, Chaos 70 %, Chop 1/16
Breakdown Chop
Duty 60 %, Action None, Chop Breakdown
Falling Stutter
Slice 1/16, Repeats 12, Pitch Step −1 st, Decay 1.5 dB
Gallop Gate
Duty 70 %, Action None, Chop Gallop, Chop and Crush Always
Lo-Fi Crush
Bits 6, Rate 8 kHz, Action None, Chop and Crush Always
Machine Gun 1/32
Slice 1/32
Repeat 1/8
The defaults
Reverse Quarter
Slice 1/4, Action Reverse
Rising Roll
Slice 1/16T, Repeats 12, Pitch Step +1 st
Spin Down and Up
Slice 1/4, Stop Time 2 beats, Action Tape Stop
Tape Stop
Slice 1/4, Action Tape Stop, Tape Start Off