OPENRIG FX · DYNAMICS
OR Gate
Silence between the notes
What it does
OR Gate opens in a millisecond when you play above the threshold. It closes 6 dB lower, after the hold time, so a fading note does not make it chatter.
Range sets how far the closed gate lowers the signal: −90 dB mutes, a few dB makes a gentle expander. While open, the gate leaves the signal untouched, bit for bit.
In OpenRig
A dynamics curve with the threshold and range, and a gain reduction meter.
When to use it
- Silence between riffs on a high-gain rig.
- Tight stops on fast, palm-muted parts.
- A soft expander to lower hiss on clean parts.
Controls
OR Gate · Mono| Control | Range | Default | What it does |
|---|---|---|---|
| Threshold | −90 dB to −20 dB | −60 dB | Level that opens the gate; it closes 6 dB lower. |
| Range | −90 dB to 0 dB | −90 dB | How far the closed gate lowers the signal; -90 dB mutes, a few dB is a gentle expander. |
| Decay | 5 ms to 2000 ms | 150 ms | Time the gate takes to close over its whole range. |
| Hold | 0 ms to 500 ms | 20 ms | Time the gate stays open after the signal falls below the closing level. |
Presets
Values that differ from the defaults- High Gain
- Threshold −55 dB, Decay 120 ms, Hold 15 ms
- Natural
- Threshold −65 dB, Decay 300 ms, Hold 30 ms
- Soft Expander
- Range −18 dB, Decay 500 ms, Hold 50 ms
- Tight Riffs
- Threshold −48 dB, Decay 40 ms, Hold 5 ms